Over 75 hours of video material (180+ episodes)
Easily watch all the videos from any computer in your house!
Instant account setup!
Professional Router Advice
I'd like to learn more... I'm ready to start learning!

Using Waterslide Decals on your Paint Boxes…

November 10, 2009 by  
Filed under Craft Paint Boxes

Well the last time I showed you how to make any size of paint boxes. To follow up with these three tools:

1) the PDF plan used to discuss the construction process,

2) TRW Episode 103 video on how to make the box and

3) the free Dynamic Box Calculator used to create custom box material lists.

Today we are going to talk about using a very neat process called “water-slide decals for wood” So what is the water-slide decal anyways? This is a simple process used to create custom decals for your custom paint boxes.

What tools do you need:

1) Computer and Laser color printer or a color photo copier and the water-slide decal paper.

Please note: You can also use the Inkjet printers but these printers need one more step to prepare your graphics. The Inkjet printer prints water based graphics so you need to spray the surface of the decals with a light acrylic coating. Be sure to coat with at least three thinly based coatings.

See this YouTube video on the steps to create and place your decal on the ceramic cup. Please note that you can add to the wood boxes just as easy. Sorry for the video it’s a bit dry but tells the story.

To prepare your paint boxes:

1) I would spray them inside and out with a base under coat then let dry,

2) Lightly sand and then add a color coat with one or two coats,

3) Let dry and again sand lightly with 600 grit then use the acrylic to coat the finished box. (at least 2 coats maybe 3 and lightly sand between the first and second using 600 plus grit paper.) The better the finished again the better the product.

4) Create the water-slide decal and apply to the top of the paint boxes.

If you decide to completely finish your painted boxes it will be your creativity that will determine your success or not in the sales department.

Try and create theme boxes using the scrap-book technique and be sure to use graphics that have good sense of taste. Better the graphics more money they will pay for the box. With the finish and creativity of the decal the box will command higher price.

Now instead of the $3.00 to $5.00 for the unfinished box you are looking at $30.00 to $50.00 to a piece of furniture or special feature piece for the coffee table.

So Buying Graphics:

If your going to buy someone’s scrap book graphics that are for sale be sure you are buying the commercial rights to the graphics. You need these rights to sell your boxes with the author’s graphics. Don’t get just the personal use rights.

It’s best to explain what you intend to do with the graphics. Your conversation might go like: I need the commercial rights to these graphics so I can sell them with my paint boxes. Also remember all graphics need to be CYMK format and at least 300 dpi? (That’s dots per inch)

That’s it for now…Next Post, and last part to this sequence on Craft Show Products.

I am going to show you how to make your purchased decals into a personal theme quickly. Again with the personal decals comes a price increase. So how can you make the decals personal, you are going to have to wait until the next post to see.

Comments

One Response to “Using Waterslide Decals on your Paint Boxes…”

  1. john reid on November 10th, 2009 4:22 pm

    keep the how to videos coming